Skip to: Content | Footer | Web Accessibility | Disability Services
Disabled wheelchair logo
Contact Information ImageTelephone: 1-800-777-0133 Hearing Impaired: TTY 1-800-368-4327

California Department of Motor Vehicles
DMV Spanish website
car image
A picture of a man and a woman using DMV Online Services
Link to online applications
Appointments
Registration Renewal
Vehicle Registration Fee Calculator
Online Driver License Renewal
Personalized Plates
Online Change of Address
Notice of Transfer and Release of Liability
Text Sizer image Decrease the text size Restore original text size Increase the text size
Enlarge Text
Click to increase the text size.
Restore Text
Click to restore original text size.
Reduce Text
Click to decrease the text size.

Registration Requirements for Home-Made, Specially Constructed, or Kit Vehicles

A "home-made, specially constructed, or kit vehicle" is a vehicle that is built for private use, not for resale, and is not constructed by a licensed manufacturer or remanufacturer. These vehicles may be built from a kit, new or used parts, a combination of new and used parts, or a vehicle reported for dismantling (junked) that, when reconstructed, does not resemble the original make of the vehicle that was dismantled.

A specially constructed vehicle (SPCNS) does not include a vehicle that has been repaired or restored to its original design by replacing parts or a vehicle modified from its original design.

Example: A Volkswagen "Beetle" with modified fenders, engine compartment lid, and front end, but still recognizable as a Volkswagen is not considered a specially constructed vehicle.

NOTE: The registration requirements for kit commercial vehicles are the same as for specially constructed vehicles.

The Registration Requirements are:

  • A completed Application for Title or Registration (REG 343).
  • A vehicle verification done by the California Highway Patrol (CHP). You must start your application process with the DMV prior to contacting the CHP for a vehicle verification. DMV verifies trailers with an unladen weight of 6,000 pounds or less.
  • A completed Statement of Construction (REG 5036).
  • Proof of ownership, such as invoices, receipts, manufacturers’ certificates of origin, bills of sale, or junk receipts for the major component parts (engine, frame, transmission, and body).

    NOTE: A motor vehicle bond is required when proof of ownership cannot be obtained for parts valued a $5,000 or more.
  • Official brake and light adjustment certificates. When an official brake and light station that inspects specific vehicles such as motorcycles and large commercial vehicles is not located within a reasonable distance, DMV will accept a Statement of Facts (REG 256) from a repair shop attesting that the brakes and lights are in proper working order. Brake and light certificates are not required for off-highway vehicles or trailers weighing less than 3,000 pounds gross vehicle weight.
  • A weight certificate for commercial vehicles weighing 10,000 pounds or less.
  • An emission control inspection (smog check) by a Bureau of Automotive Repair (BAR) Referee Station. Click here for information on SPCNS Certificates of Sequence . To make an appointment at a BAR Referee Station, call 1-800-622-7733.
  • All fees due.
  • Visit your local DMV to begin the application process, make an Appointment(s) for faster service.