Applying Registration Sticker to License Plate
- Clean surface thoroughly, scrape off accumulated stickers (sticker will not stick if wet or dirty).
- Carefully remove sticker backing by bending at scored point to expose the corners and slowly peel toward side.
- Make sure the sticker is placed flush within the wells.
- Put sticker on rear license plate as shown below:
After applying the sticker, use a box-cutter or other sharp instrument to carefully score the sticker surface with an X pattern. This will make it more difficult to remove the sticker because it will not come off the license plate in one piece.
Right Half of this well
In Top Right Corner
Truck Tractor and Commercial Vehicles with a Declared Gross Vehicle Weight of 10,001 Ibs. or more — Must apply sticker to front plate.