V C Section 21400 Uniform Standards

Uniform Standards

21400.  (a) (1) The Department of Transportation shall, after consultation with local agencies and public hearings, adopt rules and regulations prescribing uniform standards and specifications for all official traffic control devices placed pursuant to this code, including, but not limited to, stop signs, yield right-of-way signs, speed restriction signs, railroad warning approach signs, street name signs, lines and markings on the roadway, and stock crossing signs placed pursuant to Section 21364.

(2) The Department of Transportation shall, after notice and public hearing, determine and publicize the specifications for uniform types of warning signs, lights, and devices to be placed highway by a person engaged in performing work that interferes with or endangers the safe movement of traffic upon that highway.

(3) Only those signs, lights, and devices as are provided for in this section shall be placed upon a highway to warn traffic of work that is being performed on the highway.

Control devices or markings installed upon traffic barriers on or after January 1, 1984, shall conform to the uniform standards and specifications required by this section.

(b) The Department of Transportation shall revise the California Manual on Uniform Traffic Control Devices, as it read on January 1, 2012, to require the Department of Transportation or a local authority to round speed limits to the nearest five miles per hour of the 85th percentile of the free-flowing traffic. However, in cases in which the speed limit needs to be rounded up to the nearest five miles per hour increment of the 85thpercentile speed, the Department of Transportation or a local authority may decide to instead round down the speed limit to the lower five miles per hour increment, but then the Department of Transportation or a local authority shall not reduce the speed limit any further for any reason.

Amended Sec. 2, Ch. 528, Stats. 2011. Effective January 1, 2012.